08-09-2010 by admin

m1a accessories

Fulton Armory Enhanced M14 SOCOM Systems “…In keeping with the custom nature of the MCS, we contacted Fulton Armory to determine if they had any interest in producing a Modular Combat Rifle incorporating the Troy MCS. The result is the Fulton Armory/Troy Industries Modular Combat Rifle (MCR). Clint McKee, owner of Fulton Armory, is a very though minded individual whose standards for his products are incredibly high and uncompromising. When we made our proposal, Clint stated that he would reserve judgment until he saw Troy’s MCS. Clint refuses to use anything but original GI or MILSPEC components in Fulton Armory M14s, M1 Garands, or M1 Carbines and while Fulton Armory rifles cost more than others, theirs are as close as possible to an original military rifle, so when we shipped the Troy MCS to Clint, we were a little apprehensive and weren’t prepared for his overwhelmingly positive reaction. Within a week, we had our Fulton Armory/Troy Industries Modular Combat Rifle and if it isn’t the ultimate M14, we don’t know what is! “…Shooting is the acid test, and the Fulton Armory/Troy MCR lives up to its claims. Felt recoil was notably less than we are used to on a standard configuration M14/M1As. The MCS stock minimizes muzzle rise and felt recoil while enhancing control and capability for quick follow up shots. The two stage trigger is match quality and as we are fond of saying about really good triggers, breaks like the proverbial “glass rod” without creep or backlash at precisely 4.5 pounds. The Fulton Armory/Troy MCR functioned flawlessly, with shells ejected almost straight out from the receiver at a downward angle. “…Fulton Armory and Troy Industries have truly redefined the concept of a modular M14 for military, law enforcement tactical teams or anyone who wishes to own what is probably the ultimate all-around M14/M1A rifle for defense or just fun shooting. The Fulton Armory/Troy Industries Modular Combat Rifle has everything a tactical M14 user could ask – superb quality, accuracy, flexibility, ballistics and for law enforcement, tactical utility.”


Weaver Scopes

by admin

Many people also believe that a serial number can tell you whether or not a receiver is pre- or post-ban. This is not always the case. For example, if a manufacturer’s books show a serial number as being manufactured on August 23, 1994, and also lists that serial number being shipped on September 3, 1994, is this a pre-ban receiver? Well, that information alone will not tell you. If the books only show when a serial number was made and left, we still don’t know how it was shipped. Was it a rifle? or a receiver only? did the dealer who purchased it build it into a SAW before The Date? These are all questions that are unanswerable with the provided information, so don’t go on these facts alone!


Streamlight

by admin

A few notes: before November, 1981, BATF did not consider the drop-in AR-15 Accessories sear to be a machine gun in itself, because you had to replace all the internal parts with M-16 parts, as well as install the sear, and thus it didn’t convert the AR by itself. However in ATF Ruling 81-4, BATF changed its mind about what a thing had to do in order to be a conversion part, grandfathered all AR sears made before the ruling, and decided all made after that needed to be registered. HOWEVER, the fact that the sear itself, if made before 11/81, and sold through ads in Shotgun News to this day (they sure made a lot of ‘em back then, or maybe not) is not required to be registered, DOES NOT mean you may install it in an AR-15 Accessories, or even possess it with an AR-15 Accessories rifle. Either scenario is a machine gun also, and also needs to be registered. Except of course you cannot register it anymore, and thus it is just a millstone, waiting to send you to a federal prosecution. And that exact scenario has been the basis for many prosecutions.


Glock Accessories

07-09-2010 by admin

Aimpoint magnifiers

Send this Page to a FriendSend this Page to a Friend Print this PagePrint this Page Share this Product on Digg ThisSave this to del.icio.us There are many uses for this 3 x 20mm Magnifier tube, including as a handheld monocular. It is best used when mounted behind an Aimpoint sight; this gives 3x magnification through the tube, while still having the Aimpoint?s illumination visible. Different mounting options are also available for any firearm with a Picatinny-style rail using the Aimpoint TwistMount system, or with standard 30mm rings. Anodized aluminum with a rubber cover makes this magnifier waterproof up to 67 feet. Technical Information Eye relief: at 5 degrees field of view, 40-90mm – at full field of view, 60-65mm Surface finish: Anodized aluminum, rubber covered Mounting: 30mm tube, also has four screw holes in the bottom surface for alternate mounting Length: 110mm (4.3″) Width/height: 44x41mm (1.7″ x 1.6″) Ring width: 30mm Weight: 7.1 oz Notes: # Waterproof to 67 feet # Aimpoint ring product number 493244 is the intended ring for this tube # Intended to be mounted with the Aimpoint TwistMount system, may also be mounted with a 30mm ring. # May be used as a handheld monocular. # Designed so it may be used mounted behind an Aimpoint sight, giving 3x magnification through this tube while still having the Aimpoint’s illumination visible. Attention! MidwayUSA welcomes returns, for credit or refund, of product in new, unaltered condition. Please understand that we cannot accept returns on Scopes or Red Dot Sights that have been mounted unless you find they are defective.


Eotech

by admin

http://www.indiasphere.net/user/1125/submitted



GRSC Remington 870/1100 Ambidextrous Sling plate

06-09-2010 by admin

NFA WEAPONS AND THE 4TH AMENDMENT



Weigand Freedom Arms no drill and tap scope mounts

Now aWeaverstyle mount for your Freedom Arms Revolver with no drilling and tapping required. Simply remove your rear sight assembly and install our mount with the supplied screws. We have machined an integral recoil lug into the bottom of the scope mount to fit in the recess under your rear sight assembly. The mount is made from 6063-T6 Aluminum and is anodized in either Silver or Black.

Accepts allWeaverstyle rings and accessories. 4.75 long, available in black or silver, matte anodized finish, weighs 1.1 ounces.

Color Finish:

by admin

27 CFR sec. 179.11 – “pistol. A weapon originally designed, made and intended to fire a projectile (bullet) from one or more barrels when held in one hand, and having: a) a chamber(s) as an integral part(s) of, or permanently aligned with, the bore(s); and b) a short stock designed to be gripped by one hand at an angle to and extending below the line of the bore(s). The term shall not include any gadget device, any gun altered or converted to resemble a pistol, any gun that fires more than one shot without manual reloading, by a single function of the trigger, or any small portable gun such as: Nazi belt buckle pistol, glove pistol, or a one-hand stock gun designed to fire fixed shotgun ammunition.”

Raptor … or Turkey? (Part One) | Defense Tech
There ain’t a lot of love for the ol’ F-22A Raptor outside of Air Force and Lockheed Martin circles these days. Critics, especially author James Stevenson and

Active Protection” Speeds Up | Defense Tech
Armies around the world have been spending a ton of time and money trying to figure out how to keep their fighting vehicles, trucks, and personnel carriers

Pirate Hunting Drone Boats Unleashed | Defense Tech
The U.S. Navy and Coast Guard have expressed interest in the 30-ft.-long Protector, which comes mounted with a machine gun and could be retrofitted for

Defense Tech | The future of the Military, Law Enforcement and …
Defense Tech exam­ines the inter­sec­tion of tech­nol­ogy and defense from every angle and pro­vides analy­sis on what’s ahead.

Kane County Deputy killed during foot pursuit – Williams Grand Canyon Tourguide
Scott Curley was reported to be armed with a high-powered AR15 military rifle. A temporary Felony Warrant has been issued for Curley for 1st degree murder. The shooting occurred approximately 3 miles east of Fredonia,

L.A. Cops’ Super Sonic Blaster | Defense Tech
Since the early part of last year, U.S. soldiers and marines have been experimenting with a series of sonic blasters in Iraq. The Long Range Acoustic Devices,

50 – Rd. Ruger 10 / 22 Mag, Magazines & Clips, Mwg at Sportsman’s …
No more pushing in single rounds, each more and more difficult… just remove this tear-drop Mag’s back, wind crank, place ammo, replace back and you’re ready for a blast, times 50!

Suspect In Utah Sheriff Deputy’s Death Arrested – All Headline News
who hid out in the desert armed with an AR15 military rifle. Utah Gov. Gary Herbert in a statement had offered condolences to the family of Harris, an Army veteran and father of two girls. “We will never forget the …

05-09-2010 by admin

ATF takes the position that this includes any combination of parts from which a short barreled rifle can be assembled. And they said this included a set of parts with dual uses. In the Supreme court case of Thompson/ Center Arms v. US, – U.S. – (1994) ATF said it was a set consisting of a receiver, a 16″+ barrel, a pistol grip stock, a shoulder stock, and a barrel less than 16 inches long. The idea of the kit was that you needed only one receiver, and you could have both a rifle and pistol in one gun. While making a pistol out of a rifle is making a short rifle, ATF has long approved of converting a pistol into a rifle, and then converting it back into a pistol, that was not an issue. T/C made one set on a Form 1, then sued for a tax refund, claiming the set was not a SBR, unless it actually was assembled with the shoulder stock, and short barrel, something they instructed the purchaser of the set not to do. The Supreme court disagreed with ATF, and agreed with Thompson/Center.

‘Bangor 5′ Anti-War Protesters Indicted

Colt IAR (Infantry Automatic Rifle) Assault Rifle/SAW Hybrid …
News and Information On The Latest Military Defense, Law Enforcement, And Tactical Technologies from Around the World

Discovery Channel 911 call: “You’re going to need a sniper” – Worcester Telegram & Gazette
BALTIMORE — A security guard who called 911 after a gunman entered Discovery Channel’s headquarters calmly told the operator … After hours of negotiating with James Lee, 43, police shot him to death as the …

04-09-2010 by admin

26 U.S.C. sec. 5845(f) “The term destructive device means:
1) any explosive, incendiary or poison gas
A) bomb
B) grenade
C) rocket having propellant charge of more than four ounces
D) missile having an explosive or incendiary charge of more than one-quarter ounce
E) mine, or
F) similar device
2) any type of weapon by whatever name known which will, or may be readily converted to, expel a projectile by the action of a explosive or other propellant, the barrel or barrels of which have a bore of more than one-half inch in diameter, except a shotgun or shotgun shell which the Secretary or his delegate finds is generally recognized as particularly suitable for sporting purposes; and 3) any combination of parts either designed or intended for use in converting any device into a destructive device as defined in subparagraphs (1) and (2) and from which a destructive device may be readily assembled. The term ‘destructive device’ shall not include any device which is neither designed nor redesigned for use as a weapon; any device although originally designed for use as a weapon, which is redesigned for use as a signaling, pyrotechnic, line throwing, safety or similar device; surplus ordnance sold, loaned or given by the Secretary of the Army pursuant to the provisions of section 4684(2), 4685 or 4686 of title 10 of the United States Code; or any other device which the Secretary of the Treasury or his delegate finds is not likely to be used as a weapon, or is an antique or is a rifle which the owner intends to use solely for sporting purposes.”

Flashlights – AR-15 Accessories, Ruger 10/22 Accessories! AK-47 …
SureFire 8NX Commander Nitrolon Rechargeable Xenon Flashlight – 110 Lumens Black Body w/ Charger Code: SUR-8NX415-BLK Price: $162.00 Sold Out

About » Ruger 10/22 & Miini 14 Accessories
Just another WordPress site … This is an example of a WordPress page, you could edit this to put information about yourself or your site so readers know where you are coming from.

Ruger 10/22 Accessories
Mini 14 Stocks & Mounts … The original of the paperwork, particularly any that have tax stamps on them (Form 1 or 4) should be kept in a safe place.

Mounting Solutions Plus (MSP)
MSP is both a manufacturer of high quality firearm accessories and a distributor of respected firearms accessories and related products. We make and distribute products for …

Ruger 10/22 Accessories
Mini 14 Stocks & Mounts … Form Title —————————————————————— 7 (5310.12) – Application for License

Ruger 10/22 Accessories » Mini 14 Stocks & Mounts
Mini 14 Stocks & Mounts … The case is something to which you can point a CLEO who claims to refuse to do the signoff because of liability.

AR-15 Accessories – AR-15 Accessories, Ruger 10/22 Accessories! AK …
A.R.M.S. #38STD Swan Sleeve with Flip Up Rear Sight for AR-15 Code: ARMS-38STD-556 Price: $150.00

Ruger 10/22 Accessories » Mini 14 Stocks & Mounts
Mini 14 Stocks & Mounts … Machine guns are also treated differently. In 1986, as part of the Firearm Owners’ Protection Act (FOPA), Congress prohibited individuals from …

Ruger 10/22 Accessories » Mini 14 Stocks & Mounts
Mini 14 Stocks & Mounts … In early 1994, ATF decided (in ATF Rulings 94-1 and 94-2) that three 12 gauge shotgun models, the USAS 12, Striker 12, and Street Sweeper, were destructive …

by admin

aimpoint micro

Click to enlarge Aimpoint Micro T-1 Sight – Inset 1 Aimpoint Micro T-1 Sight – Inset 2 Aimpoint Micro T-1 Sight – Inset 3 Aimpoint Micro T-1 Sight – Inset 4 Aimpoint Micro T-1 Sight – Inset 5 Aimpoint Micro T-1 Sight In response to the need for smaller and lighter tactical sights, Aimpoint is proud to introduce the new Micro T-1 electronic red-dot sight. Built to offer the same battleproven ruggedness as larger Aimpoint sights, the Micro T-1 is able to perform under extreme conditions while adding negligible weight to your weapon. This new compact sight is suitable for use on rifles, carbines, shotguns, submachineguns and handguns. The Aimpoint Micro T-1 is ideal as a stand-alone sight, and can also be piggybacked on top of larger magnifying scopes, night vision, or thermal imaging optics. The Micro T-1 weighs in at only 3.6 ounces, and comes complete with a patent-pending integral Picatinny mount that is keyed into the sight body to absorb recoil. The Micro T-1 is a 1X (non magnifying) parallax-free optic that features a 4 minute of angle (MOA) red dot for fast target acquisition. No tools are required to zero the sight, as the top of the caps covering the windage and elevation screws fit directly into holes on the adjustment screws to make the adjustment. The Micro T-1 is waterproof to 25 meters (80 feet) and tough enough to stand up to the worst field conditions. Optimized for use with all generations of night vision devices, the Micro T-1 features a manual adjustment switch with 6 night vision compatible settings and 7 daylight settings (including one extra bright setting for use in desert sunlight or with laser protection filters). Aimpoint s state-of-the-art ACET diode technology allows the Micro T-1 to operate continuously for over 5 years on a single CR-2032 battery. The Micro T-1 is a very exciting tactical optic not just because of its small size, but also due to its extreme versatility said Aimpoint Vice President Brian Lisankie. Not only is the Micro T-1 a full-featured stand-alone combat optic, it can also be mounted on top of other magnifying optics, giving the operator dual capabilities to engage targets in a CQB situation as well as at longer ranges. Now, everyone can have the speed advantage of a red dot sight, no matter what type of weapon or primary optic they are carrying. Unique features of the Aimpoint Micro T-1

Search

Pages